AS-Interface Handheld VBP-HH1-V3.0-V1

●Addressing and programming AS-Interface nodes;

●Displaying the assigned node addresses and the status of the inputs;

●Setting outputs at the AS-Interface node;

●Also supports profiles S-7.7.A.7 (Spec 3.0), S-0.B and S-7.B (AS Interface Safety at Work);

●The node connection is short-circuit and overload proof;

●Additional M12 plug for external power supply for AS-Interface and AUX;

●Connecting cable included with delivery;

●Battery charger included with delivery;

product details

product description

function

The AS-Interface handheld VBP-HH1-V3.0-V1 is an addressing device according to ASInterface specification 3.0.This addressing device is used to program AS-Interface slaves and for function testing purposes.In addition, the following new functionalities have been integrated:

●Permanent data interchange with AS-Interface slaves;

●Support of the data interchange with 4E4A slaves in ext. addressing mode;

●Display of the safety code for AS-Interface Safety at Work slaves;

The AS-Interface connection adapter on the top of the addressing device is used for the connection of AS-Interface slaves (sensors, actuators and modules) to the addressing device. The following devices and models can be connected via a plug connection on the AS-Interface connection adapter to the addressing device:

devices with M12 plug, VariKont M system, VariKont system, FP model, AS-Interface module of models G1, G4, G16.Please use the adapter cable VAZ-PK-1,5M-V1-G (included in the scope of delivery) for device models with integrated addressing jacks.

There is an additional M12 plug on the front side of the housing. It provides a connection possibility with external auxiliary voltage AUX for slaves,which expect this at the connection adapter. Due to the integrated decoupling coil it is also possible to connect DC- or AS-Interface voltage to energize the slave directly and to relieve the internal battery.A connection cable for the extension is included in the scope of delivery.